John Deere 4230
John Deere 4230 Specs
John Deere 4230 Serial Numbers
1973 | 1000 |
1974 | 13000 |
1975 | 22074 |
1976 | 28957 |
1977 | 35588 |
Final | 42331 |
John Deere diesel 6-cylinder liquid-cooled inline horizontal-shaft Engine Detail
Displacement | 404 ci 6.6 L |
Bore/Stroke | 4.25×4.75 inches 108 x 121 mm |
Air cleaner | dry with secondary element |
Pre-heating | ether injection |
coolant heater Opt | |
Compression | 16.2:1 |
Rated RPM | 2200 |
Idle RPM | 800-2400 |
Operating RPM | 1500-2200 |
Firing order | 1-5-3-6-2-4 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 17 qts 16.1 L |
Coolant capacity | 24 qts 22.7 L |
John Deere gasoline 6-cylinder liquid-cooled Engine Detail
The gasoline engine was only available during the 1973 model year for the Deere 4230. | |
Displacement | 362 ci 5.9 L |
Bore/Stroke | 4.25×4.25 inches 108 x 108 mm |
Rated RPM | 2200 |
Firing order | 1-5-3-6-2-4 |
Starter | electric |
Starter volts | 12 |
John Deere 4230 Power
PTO (claimed) | 100 hp 74.6 kW |
Drawbar (tested) | 83.95 hp 62.6 kW |
PTO (tested) | 100.32 hp 74.8 kW |
Transmission options
8-speed partially synchronized | |
16-speed partial power shift | |
8-speed full power shift | |
13-speed creeper |
John Deere Syncro-Range Transmission
Transmission | John Deere Syncro-Range |
Type | partially synchronized |
Gears | 8 forward and 2 reverse |
Clutch | hydraulic wet disc |
Oil capacity | 64 qts 60.6 L |
Four shift stations with two gears each, plus reverse gear in the first two shift stations. Tractor must be stopped, and clutch used, to shift between stations. Once in a shift station the tractor may be shifted on the move, using the clutch, between the gears in that station. |
John Deere Quad-Range Transmission
Transmission | |
Type | partial power shift |
Gears | 16 forward and 6 reverse |
Clutch | hydraulic wet disc |
Oil capacity | 64 qts 60.6 L |
Four gears (1-4) in four ranges (A-D). Power shift between gears 1-2 and 3-4 in each range with a synchronized shift (using clutch) between 2-3. Tractor must be stopped to shift range. |
John Deere Power Shift Transmission
Transmission | John Deere Power Shift |
Type | full power shift |
Gears | 8 forward and 4 reverse |
Clutch | hydraulic wet discs |
Oil capacity | 62 qts 58.7 L |
Syncro-Range Creeper Transmission
Transmission | Syncro-Range Creeper |
Type | creeper |
Gears | 13 forward and 4 reverse |
Optional creeper range adds additional speeds to the first five gears of the Syncro-Range transmission. An interlock prevents shifting into gears 6 through 8 while the creeper is engaged. |
Mechanical
Drive | 4×2 2WD |
4×4 HFWD 4WD | |
Final drives | planetary |
Differential lock | hydro-mechanical rear |
Power steering | |
Differential hydraulic wet disc brakes | |
Open operator station. Four-post Roll-Gard ROPS optional. Sound-Gard cab with air-conditioning optional. |
Capacity
Fuel | 37 gal 140.0 L |
Hydraulic system | 16 gal 60.6 L |
Hydraulics
Type | closed center |
Capacity | 16 gal 60.6 L |
Valves | 1 to 3 |
Tractor hitch
Rear Type | II |
Power Take-off (PTO)
Rear PTO | independent |
Rear PTO Type | 540/1000 (1.375) |
Electrical
Ground | negative |
Charging system | alternator |
Batteries | 2 |
Battery volts | 6 |
John Deere 4230 Tires
Ag front | 9.5L-15 |
Ag rear | 18.4-34 |
Ag front | 7.5L-15 |
7.50-16 | |
11.00-12 | |
7.50-18 | |
10.00-16 | |
12.4-24 | |
Ag rear | 23.1-26 |
23.1-30 | |
20.8-34 | |
16.9-34 | |
15.5-38 | |
16.9-38 | |
18.4-38 |
Dimensions
Wheelbase | 104 inches 264 cm |
2WD Length | 165.6 inches 420 cm |
4WD Length | 169.3 inches 430 cm |
Width | 89.625 inches 227 cm |
54.375 inches (Cab) 138 cm | |
Rack-and-pinion rear axle | 3.39 by 90 inches 86 by 2286 mm |
Rack-and-pinion rear axle | 3.39 by 96 inches 86 by 2438 mm |
Rack-and-pinion rear axle | 3.39 by 104 inches 86 by 2641 mm |
Rack-and-pinion rear axle | 3.39 by 113 inches 86 by 2870 mm |
Front tread | 48 to 79 inches 121 to 200 cm |
Front tread | 52 to 86 inches 132 to 218 cm |
Front tread | 58 to 96 inches 147 to 243 cm |
Rear tread | 60 to 94 inches 152 to 238 cm |
Rear tread | 60 to 101 inches 152 to 256 cm |
Rear tread | 61 to 109 inches 154 to 276 cm |
Rear tread | 61 to 118 inches 154 to 299 cm |
John Deere 4230 Weight
Shipping | 8,100 lbs (Syncro) 3674 kg |
8,500 lbs 3855 kg | |
Operating | 10,800 lbs 4898 kg |
Ballasted | 14,150 lbs 6418 kg |
John Deere 4230 Height
Steering wheel | 86.7 inches 220 cm |
Cab | 109.875 inches 279 cm |
Exhaust | 151.75 inches 385 cm |
Attachments
John Deere 148 loader | |
John Deere 158 loader |